Oracle X8-8, Installation Manual

Page: 74 / 134

Oracle ILOM Hardware and Interfaces
■
Host-to-ILOM interconnect – For information, refer to "Dedicated Interconnect SP
Management" in Oracle ILOM Administrator's Guide for Configuration and Maintenance,
Firmware Release 4.0.x at
https://www.oracle.com/goto/ilom/docs
.
For information about Oracle ILOM features, refer to the Oracle Integrated Lights Out Manager
(ILOM) Documentation Library at
https://www.oracle.com/goto/ilom/docs
.
Oracle ILOM Hardware and Interfaces
The following table lists the major components and interfaces of Oracle ILOM.
Component Function
Hardware ■ Embedded service processor (SP) chipset that monitors the status and configuration of components
such as fans, processors, memory, PCIe devices, storage drives, and power supplies
■ Two back panel external connections: NET MGT port Ethernet connection and SER MGT port RJ-
45 serial management connection
Interfaces ■ Web browser interface
■ Command-line interface (CLI), available over SSH or through a direct connection to the SER MGT
port
■ SNMP v3 interface
Related Information
■
Oracle Integrated Lights Out Manager (ILOM) 4.0 Documentation Library at:
https://
www.oracle.com/goto/ilom/docs
Accessing Oracle ILOM
You can log in to the Oracle ILOM command-line interface (CLI) locally using the RJ-45 serial
management port (SER MGT). You also can log in to the Oracle ILOM web interface or CLI
remotely using one of the network ports on the server.
To log in to Oracle ILOM, follow these procedures:
■
“Log In to Oracle ILOM Using a Local Serial Connection” on page 75
74 Oracle Server X8-8 Installation Guide • June 2019