Oracle X8-8, Installation Manual

Page: 66 / 134

Power On the Server
In Standby power mode, the server is not initialized or powered on.
See Also ■
“Back Panel Connectors and Ports” on page 58
Power On the Server
Before You Begin ■
The system chassis must be in the rack and already cabled with the power cords plugged in.
■
For single 4-socket systems and single 8-socket systems, perform this procedure for system
A.
■
For dual 4-socket systems, perform this procedure for system A and system B.
■
Each server should be in Standby power mode with the front OK indicator blinking (on for
100ms, off for 2900ms).
1. Confirm that the server is in Standby power mode.
The AC OK power supply LED indicators are lit, the green SP OK LED is steady on, and the
System OK LED flashes slowly.
2. Choose one of the following methods to apply Main power to a server.
■ On/Standby button: When physically at the system, press the On/Standby
button on the front of each server.
The green System OK indicator LED is steady on, and the server is in Main power mode.
■ Oracle ILOM serial connection with an attached terminal device:
a. Press Enter on the terminal device to create a connection between the
serial console and the Oracle ILOM SP.
The Oracle ILOM Login prompt appears.
b. Log in to Oracle ILOM. Type your default user name and password.
The default Oracle ILOM user name is
root
and the default password is
changeme
.
For example:
host-name
login: root
Password: changeme
The Oracle ILOM command prompt (
->
) appears.
66 Oracle Server X8-8 Installation Guide • June 2019