Oracle X8-8, Installation Manual

Page: 47 / 134

Rackmount Kit Contents
Callout Description
1 Rackmounting kit. See “Rackmount Kit Contents” on page 47 .
2 Tray
3 Box
4 Foam inserts
5 Server
6 Pallet
2.
Open the top of the box.
a. Cut the straps.
b. Cut or remove the tape.
c. Open the flaps.
3. Remove the tray and set it aside.
4.
Lift the box up and away from the server.
5. Remove the foam inserts.
a. Fold the corrugated flap down to release the front foam insert.
b.
Remove the front and back inserts.
6. Unwrap the antistatic wrapper from the server.
7. To remove the server from the pallet, insert the blades of the lift in the gap
between the server and the pallet.
For rack mounting instructions, see “Rackmounting the Server” on page 49 .
Next Steps
■
“Install Shelf Rails and Back Mounting Brackets” on page 50
Rackmount Kit Contents
The following figure shows the contents of the Rackmount Kit.
Installing the Server Into a Rack 47