manualshive.com logo in svg

Oracle X7-8, Service Manual

Share
Download
Oracle X7-8 Service Manual Download Page 17

About the Oracle Server X7-8

These sections describe the controls, connectors, LEDs, system components, and replaceable

components of the server:

■

“Product Description” on page 17

■

“About Controls and Connectors” on page 19

■

“Identifying Components” on page 24

■

“CPU Module (CMOD) Overview” on page 28

■

“System Module (SMOD) Overview” on page 34

Note - 

Always update the server with the latest firmware, drivers, and other hardware-related

software by downloading the latest software release package when you first receive the server,

and for every new software release. For information about the software release packages and

how to download the software, refer to 

“Getting Firmware and Software Updates” in 

Oracle

Server X7-8 Installation Guide

.

Product Description

Oracle Server X7-8 is an enterprise class 5 rack unit (5U) server. You can configure the server

as one 4-socket server, two independent 4-socket servers, or one 8-socket server. The system

supports the following components.

Feature

System Component

Processors (CPU module/CMOD)

Up to eight Intel Xeon vx processors are supported.

■ Intel 8168 processor, 24-core, 2.7-GHz, 205W (4-socket servers or 8-socket server)
■ Intel 8160 processor, 24-core, 2.1-GHz, 150W (4-socket servers or 8-socket server)
■ Intel 6140 processor, 18-core, 2.3-GHz, 150W (4-socket servers)
■ Intel 6128 processor, 6-core, 3.4-GHz, 125W (4-socket servers)

8-socket configurations support up to 24-core (shelf 4) processors for total of 224 cores.

4-socket configurations support up to 24-core (shelf 4) processors for total of 112 cores.

About the Oracle Server X7-8

17

Summary of Contents for X7-8





















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands