Oracle X7-2L, Service Manual

Page: 154 / 308

Install a Processor
5.
Return the server to operation.
a.
Install the air baffle.
See “Install the Air Baffle” on page 113 .
b.
Install the server top cover.
See “Install the Server Top Cover” on page 212 .
c.
Return the server to the normal rack position.
See “Return the Server to the Normal Rack Position” on page 214 .
d.
Reconnect the power cords to the power supplies, and power on the server.
See “Reconnect Power and Data Cables” on page 216 and “Power On the
Server” on page 216 . Verify that the power supply AC OK LED is lit.
6.
Use Oracle ILOM to clear server processor faults.
Refer to the Oracle Integrated Lights Out Manager (ILOM) 4.0 Documentation Library at
http://www.oracle.com/goto/ilom/docs
for more information about the following steps.
a.
To show server faults, log in to the server as
root
using the Oracle ILOM CLI,
and type the following command to list all known faults on the server:
->
show /SP/faultmgmt
The server lists all known faults, for example:
-> show /SP/faultmgmt
Targets:
shell
0 (/SYS/MB/P0)
Properties:
Commands:
cd
show
Alternatively, to list all known faults in the server, log into the Oracle Solaris OS and
issue the
fmadm faulty
command, or log into the Oracle ILOM service processor from
the Oracle ILOM Fault Management Shell and issue the
fmadm faulty
command. For
more information about how to use the Oracle ILOM Fault Management Shell and
supported commands, see the Oracle ILOM User's Guide for System Monitoring and
Diagnostics Firmware Release 4.0.x in the Oracle Integrated Lights Out Manager (ILOM)
4.0 Documentation Library at
http://www.oracle.com/goto/ilom/docs
.
154 Oracle Server X7-2L Service Manual • October 2017