Oracle X7-2 Installation Manual Download Page 94

Page: 94 / 148

Redirect Host Server Desktop or Storage Devices

Redirect Host Server Desktop or Storage Devices

Before you begin, ensure that the following requirements are met:

■

The following user credentials are required:

■

Console ( c ) user role privileges are required to use the Oracle ILOM Remote System

Console Plus.

■

A user account on the host server is required to log in to the redirected host desktop.

■

To exclusively control the storage media from the Oracle ILOM System Remote

Console Plus application, you must have root privileges on a Linux client or root

administrator privileges on a Windows client.

■

The mouse mode is set correctly (see

“Set the Mouse Mode” on page 93

■

Java Runtime Environment (JRE) 1.6 or later is installed. For IPv4 networks, a 32-bit or

64-bit JDK is required. For IPv6 networks, a 32-bit or 64-bit Java Development Kit (JDK)

170636 or higher is required.

■

The remote management client is connected to a network that has access to one of the

Ethernet management ports on the server.

To launch the Oracle ILOM Remote System Console Plus application, follow these steps:

Log in to the Oracle ILOM web interface.

For instructions, see

“Accessing Oracle ILOM” on page 84

To launch the Oracle ILOM Remote System Console Plus application, click

Remote Control → Redirection, and click the Launch Remote Console button.

The following events can occur:

■

If this is the first time launching the Oracle ILOM Remote System Console Plus application,

a prompt to launch the Java web start program appears. Follow the instructions provided

in the prompt to continue launching the Oracle ILOM Remote System Console Plus

application.

■

If your system does not meet the Java security requirements for launching Oracle ILOM

Remote System Console Plus, a Java error message appears. Follow the instructions

provided in the Java error message to launch the Oracle ILOM Remote System Console

Plus application.

■

The Oracle ILOM Remote System Console Plus window for video redirection appears.

■

The redirected video console displays the remote host server in its present state. For

example, if the host server is powering on, a set of boot messages appears in the video

console.

■

When a prompt for logging in to the host server appears, enter your user credentials for the

remote host server.

Oracle Servers X7-2 and X7-2L Installation Guide • October 2017

Summary of Contents for X7-2





















































































































































Search results

Summary of Contents for X7-2

Reviews:

Related manuals for X7-2

Brands by name

Popular brands

Oracle X7-2, Installation Manual

Search results

Summary of Contents for X7-2

Reviews:

Related manuals for X7-2

Brands by name

Popular brands