Oracle X4 series, Administration Manual

Page: 95 / 240

Setting SP Clock Properties
This procedure provides web and CLI instructions for both a server service processor (SP) and a
chassis monitoring module (CMM).
To define a new local Oracle ILOM user account and to set user roles for that
account:
■ From the Web interface:
a. Click ILOM Administration > User Management > User Accounts.
b. In the Users table, click Add.
c. In the User Account dialog box, specify a user name and password for
the local account, and then assign a user profile.
d. Click Save.
■
From the CLI:
a. To assign a user name and password to a new local account, type:
set /[
SP|CMM
]/users/[
username
] password=[
password
]
b. To assign either individual user roles or a predefined user profile to the
user name specified in Step 1, type:
set /[
SP|CMM
]/users/[
username
] role=[
a|u|c|r|o|s
|
Operator
|
Administrator ]
See Also ■
Managing User Credentials, Oracle ILOM Configuration and Maintenance Guide for
firmware version 3.1 or 3.2.
■
Add New Users to Oracle ILOM,
Oracle ILOM Quick Start Guide
for firmware 3.1, or
Oracle ILOM Getting Started Guide
for firmware 3.2
Setting SP Clock Properties
You can set the service processor clock properties using Oracle System Assistant or using
Oracle ILOM.
■
“Set SP Clock Properties (Oracle System Assistant)” on page 96
■
“Set SP Clock Properties (Oracle ILOM)” on page 97
Performing Initial Setup Actions for Server Management 95