Oracle X4 series Administration Manual Download Page 52

Page: 52 / 240

Power Off Host Using the Power Button

Power State

Description

Caution -

Data loss: To prevent data loss, prepare the operating system for shutdown before

performing an immediate power off.

You can control power to your host using the recessed Power button, the Oracle ILOM web

interface, or the Oracle ILOM command-line interface (CLI).

■

To use the power button, see

“Power Off Host Using the Power Button” on page 52

and

“Power On Host Using the Power Button” on page 53

■

To use Oracle ILOM, see

“Power Host On and Off (Oracle ILOM)” on page 53

Note -

If you updated the system firmware and selected the Delay BIOS Upgrade option,

Oracle ILOM installs the BIOS firmware upgrade when you reset or power cycle your server.

This causes a reset to take longer than normal and causes the server to power cycle during the

reset. This is normal, expected behavior during a delayed BIOS upgrade. For more details, see

“Update BIOS and SP Firmware or CMM Firmware (Oracle ILOM)” on page 229

Power Off Host Using the Power Button

Locate the recessed Power button on the server front panel.

See your installation manual for the location.

Note -

The Power button is recessed on most systems.

Press the Power button.

Use a stylus or other pointed, non-conducting object if required.

■

To perform a graceful shutdown: Press and release the power button.

ACPI-enabled operating systems perform an orderly shutdown. Systems not running

ACPI-enabled operating systems might ignore this event, and fail to shut down the host.
The OK status indicator on the front panel blinks to indicate that the system is in Standby

power mode.

■

To perform an immediate shutdown: Press and hold the Power button for at

least 5 seconds.

The OK status indicator on the front panel blinks to indicate that the system is in Standby

power mode.

Oracle X4 Series Servers Administration Guide • April 2016

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands