Oracle X4 series Administration Manual Download Page 197

Page: 197 / 240

Legacy BIOS Boot Mode and UEFI Boot Mode

When to Select Legacy or UEFI BIOS Boot Mode

When the option is available to choose between Legacy BIOS Boot Mode or UEFI Boot Mode,

the advantages of UEFI Boot Mode include:

■

Boots faster.

■

Avoids legacy option ROM address constraints. For more information, see

“Other BIOS

Boot Mode Considerations” on page 197

■

Supports operating system boot partitions greater than 2 terabytes (2 TB). For more

information about limitations for supported operating systems, refer to your server product

notes.

■

Integrates PCIe device configuration utilities with BIOS Setup Utility menus.

■

Displays bootable operating system images in the boot list as labeled entities. For example,

it displays Windows boot manager labels instead of raw device labels.

■

Provides efficient power and system management.

■

Includes robust reliability and fault management.

■

Uses UEFI drivers.

Choose Legacy BIOS Boot Mode:

■

If your operating system does not support booting in UEFI Boot Mode

■

To allow HBAs and Express Module devices to use option ROM

Other BIOS Boot Mode Considerations

Choosing Legacy BIOS Boot Mode allows HBAs and Express Module devices to use option

ROMs. Choosing UEFI Boot Mode uses UEFI drivers.

Note -

The operating system can only boot with the boot mode property value that was initially

set at installation. If you change the boot mode property value after installing the operating

system, the operating system will become inoperable (will not boot). To resolve this issue, you

must change the boot mode property value back to its initial setting.

Only devices that support the selected boot mode are listed on the BIOS Boot screen. If you

select UEFI Boot Mode, only boot candidates that support UEFI BIOS Boot Mode are listed

on the BIOS Setup Utility screens in the boot order list. If you select Legacy BIOS Boot Mode,

only boot candidates that support Legacy BIOS Boot Mode are listed in the boot order list.

Setting Up and Configuring BIOS

197

Summary of Contents for X4 series

















































































































































































































































Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands

Oracle X4 series, Administration Manual

Search results

Summary of Contents for X4 series

Reviews:

Related manuals for X4 series

Brands by name

Popular brands