manualshive.com logo in svg

Oracle SuperCluster T5-8, Owner'S Manual

Share
Download
Oracle SuperCluster T5-8 Owner'S Manual Download Page 26

Understanding the Hardware Components and Connections

Cisco Catalyst 4948 Ethernet Management Switch

The Cisco Catalyst 4948 Ethernet management switch contains two power supplies. The Cisco

Catalyst 4948 Ethernet management switch can continue to operate normally if one of those

power supplies fails.

Power Distribution Units

Each Oracle SuperCluster T5-8 contains two power distribution units, in either the Full Rack

or Half Rack version. The components within Oracle SuperCluster T5-8 connect to both power

distribution units, so that power continues to be supplied to those components should one of the

two power distribution units fail. For more information, see 

“Power Distribution Units Physical

Connections” on page 45

.

Understanding the Physical Connections

The following topics describe the physical connections between the components within Oracle

SuperCluster T5-8:

■

“Understanding the SPARC T5-8 Server Physical Connections” on page 26

■

“Understanding the Exadata Storage Server Physical Connections” on page 36

■

“Understanding the ZFS Storage Appliance Physical Connections” on page 39

■

“Power Distribution Units Physical Connections” on page 45

Understanding the SPARC T5-8 Server Physical Connections

These topics provide information on the location of the cards and ports that are used for the

physical connections for the SPARC T5-8 server, as well as information specific to the four sets

of physical connections for the server:

■

“PCIe Slots (SPARC T5-8 Servers)” on page 27

■

“Card Locations (SPARC T5-8 Servers)” on page 29

■

“NET MGT and NET0-3 Port Locations (SPARC T5-8 Servers)” on page 31

■

“InfiniBand Private Network Physical Connections (SPARC T5-8 Servers)” on page 32

■

“Oracle ILOM Management Network Physical Connections (SPARC T5-8

Servers)” on page 35

■

“1-GbE Host Management Network Physical Connections (SPARC T5-8

Servers)” on page 35

26

Oracle SuperCluster T5-8 Owner's Guide • May 2016

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands