Oracle SuperCluster T5-8 Owner'S Manual Download

Page: 25 / 356

Understanding the Hardware Components and Connections

■

Disk drives – Each Exadata Storage Server contains 12 disk drives, where you can

choose between disk drives designed for either high capacity or high performance when

you first order Oracle SuperCluster T5-8. Oracle SuperCluster T5-8 software provides

redundancy between the 12 disk drives within each Exadata Storage Server. For more

information, see

“Cluster Software for the Database Domain” on page 85

ZFS Storage Appliance

Each Oracle SuperCluster T5-8 contains one ZFS storage appliance, in either the Full Rack or

Half Rack version. The ZFS storage appliance consists of the following:

■

Two ZFS storage controllers

■

One Sun Disk Shelf

Redundancy in the ZFS storage appliance is achieved two ways:

■

Through connections from the two ZFS storage controllers to the Sun Disk Shelf.

For more information, see

“Understanding the ZFS Storage Appliance Physical

Connections” on page 39

■

Through components within the ZFS storage appliance itself:

■

Power supplies – Each ZFS storage controller and Sun Disk Shelf contains two power

supplies. Each ZFS storage controller and the Sun Disk Shelf can continue to operate

normally if one of those power supplies fails.

■

Disk drives – Each ZFS storage controller contains two mirrored boot drives, so the

controller can still boot up and operate normally if one boot drive fails. The Sun Disk

Shelf contains 20 hard disk drives that are used for storage in Oracle SuperCluster

T5-8, and 4 solid-state drives that are used as write-optimized cache devices,

also known as logzillas. Oracle SuperCluster T5-8 software provides redundancy

between the disk drives. For more information, see

“Understanding the Software

Configurations” on page 46

Sun Datacenter InfiniBand Switch 36 Switches

Each Oracle SuperCluster T5-8 contains three Sun Datacenter InfiniBand Switch 36 switches,

in either the Full Rack or Half Rack version, two of which are leaf switches (the third is used as

a spine switch to connect two racks together). The two leaf switches are connected to each other

to provide redundancy should one of the two leaf switches fail. In addition, each SPARC T5-8

server, Exadata Storage Server, and ZFS storage controller has connections to both leaf switches

to provide redundancy in the InfiniBand connections should one of the two leaf switches fail.

For more information, see

“Understanding the Physical Connections” on page 26

Understanding the System

Summary of Contents for SuperCluster T5-8





































































































































































































































































































































































Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands

Oracle SuperCluster T5-8, Owner'S Manual

Search results

Summary of Contents for SuperCluster T5-8

Reviews:

Related manuals for SuperCluster T5-8

Brands by name

Popular brands