Oracle Sun Server X4-4, Installation Manual

Page: 31 / 148

Tools and Equipment Needed
Callout Description
5 RJ-45 to DB-9 crossover adaptor
6 Printed documents
7 2 AC power cords
Required server components and most options are installed at the factory. However, some
ordered options might be packaged separately. If possible, install optional components before
installing the server in a rack. For instructions for installing server options, see “Optional
Component Installation” on page 32 .
Tools and Equipment Needed
To install the system, you need the following tools:
■
No. 2 Phillips screwdriver
■
ESD mat and grounding strap
You also need a system console device, such as one of the following:
■
Workstation
■
ASCII terminal
■
Terminal server
■
Patch panel connected to a terminal server
ESD Precautions
Electronic equipment is susceptible to damage by static electricity. Use a grounded antistatic
wrist strap, foot strap, or equivalent safety equipment to prevent electrostatic damage (ESD)
when you install or service the server.
Caution -
Equipment damage. To protect electronic components from electrostatic damage,
which can permanently disable the system or require repair by authorized service technicians,
place components on an antistatic surface, such as an antistatic discharge mat, an antistatic bag,
or a disposable antistatic mat. Wear an antistatic grounding strap connected to a metal surface
on the chassis when you work on system components.
Preparing to Install the Server 31