Oracle Sun Fire X4800 Product Notes Download Page 89

Page: 89 / 92

BIOS Issues

The following table lists the BIOS issues for Oracle's Sun Fire X4800 server.

BIOS Issues

Workaround

“Auto Boot Host On Power Loss Control Is Deactivated” on page 89

N/A

“Update Oracle ILOM and BIOS Firmware Before Updating Other Devices' Firmware (CR

6537282)” on page 89

N/A

“Hotplugging PCIe EM Card Fails When Replacing the Original Card With One of a Different

Type (CR 7003634)” on page 90

Yes

“Messages Complain of Failure to Allocate I/O Resources (CR 6984329)” on page 90

Yes

“DIMM Failure Causes Other DIMMs To Be Disabled (CR 6929978)” on page 91

N/A

Auto Boot Host On Power Loss Control Is Deactivated

The control to Auto Boot Host On Power Loss in the BIOS Setup Utility has been deactivated.

To set Auto Boot Host On Power Loss, use Oracle ILOM instead.

Update Oracle ILOM and BIOS Firmware Before Updating

Other Devices' Firmware (CR 6537282)

When updating the firmware for multiple devices, if your list of devices includes Oracle ILOM

and BIOS firmware, update it first.

BIOS Issues

Summary of Contents for Sun Fire X4800





























































































Search results

Summary of Contents for Sun Fire X4800

Reviews:

Related manuals for Sun Fire X4800

Brands by name

Popular brands

Oracle Sun Fire X4800, Product Notes

Search results

Summary of Contents for Sun Fire X4800

Reviews:

Related manuals for Sun Fire X4800

Brands by name

Popular brands