▼
How to Install the Hard Drive Backplane
See:
■
“Locations of Internal Server Components” on page 30
■
“Sun Fire X2270 M2 Server Internal Cabling” on page 61
Position the backplane board in the server chassis with the SATA connectors facing upward and
align the eight screw holes in the backplane with the threaded standoffs in the server chassis.
To secure the backplane to the server chassis, fully tighten the eight screws.
Connect the HD/SSD power cable and four SATA cables to the backplane.
Take care to route the cables properly.
Install all HD/SSDs. See
“How to Install a Removable Hard Drive Assembly”on page 51
.
Install the air duct. See
“How to Install the Air Duct”on page 53
.
Prepare the server for operation. See
“How to Prepare for Operation”on page 26
.
“How to Remove the Hard Drive Backplane” on page 57
Before You Begin
1
2
3
4
5
6
See Also
Replacing the Hard Drive Backplane Assembly (FRU)
Sun Fire X2270 M2 Server Service Manual • January, 2012, –12
58
Summary of Contents for Sun Fire X2270 M2
Page 1: ...Sun Fire X2270 M2 Server Service Manual Part No 821 1345 January 2012 12 ...
Page 4: ...4 ...
Page 10: ...10 ...
Page 94: ...94 ...