Oracle storagetek sl150, Library Manual

Page: 86 / 196

Library firmware is named
p12345678
_
xyz0_Generic.zip
, where
p12345678
represents a part number, x represents the major release number, and yz
represents the minor release number.
Drive firmware is named
123456_01.zip
, where
123456_01
represents a part
number.
10.
Verify the checksum of the file (see Verify the Download ).
Verify the Download
Confirm the file downloaded correctly by comparing the checksum.
1.
At the bottom of the File Download dialog, click on the View Digest Details link.
2.
Copy the MD5 and SHA checksums and paste them into a text file.
3.
Verify the integrity of the downloaded ZIP file. Using a suitable checksum utility,
calculate the MD5 or SHA-1 digest value of the downloaded file, and compare the
result to the corresponding MD5 or SHA-1 value saved in your text file.
You can use
digest
(Oracle Solaris) and
dgst
(Linux). Microsoft offers a
commandline File Checksum Integrity Verifier utility (
fciv.exe
) as a free download
from
http://support.microsoft.com/kb/841290
.
4.
If the digest value that you calculated for the file does not match the value
displayed in the dialog, the file is corrupt and cannot be installed successfully.
Stop here, and re-download the firmware zip.
Update the Library Firmware
Update the library firmware to access the latest features.
1.
Download the library firmware (see Download Firmware from My Oracle Support ).
2.
Extract the firmware ZIP (the extracted file should contain a .tar file and release
notes).
3.
Log in to the remote interface as an administrator.
4.
Select Firmware in the left menu.
5.
Select the Library Firmware tab, and then click Upgrade .
6.
Browse to the folder that contains the firmware, and select the
SL150_xyz0.tar
file, where
xyz0
is the four-digit form of the release number.
7.
To install the new firmware and restart the library, click OK.
The upgrade dialog displays a progress meter and the estimated time required for
the upgrade. Do not close this window until the installation process finishes.
8.
If the firmware upgrade fails, verify the file (see Verify the Download ). If the file is
ok, create a service request (see Create a Service Request ).
Revert to the Previous Library Firmware
Roll back to the previously installed version if you have problems with a library
firmware update.
1.
Log in to the remote user interface as an administrator.
Chapter 4
Update Firmware
4-11