6
Turn on Power and Install Management Host Software
1. Power on the array and configure controller IP addresses per the detailed information in the Installation
Guide. Note: IP addresses are auto-configured via DHCP by default, but can be changed manually using
each controller’s serial port (see
FIGURE 5
).
2. Download Sun Storage Common Array Manager software and install on the management host, as
described in the
Sun Storage Common Array Manager Quick Start Guide
.
Documentation for This Product
■
Additional documentation for the Sun Storage 6180 array is available at:
http://download.oracle.com/docs/cd/E19373-01/index.html
■
Documentation for the Sun Storage Common Array Manager software is available at:
http://www.oracle.com/technetwork/documentation/disk-device-194280.html
Oracle Contact Information
Review safety information
Important Safety Information for Sun Hardware Systems
Sun Storage 6180 Safety and Compliance Manual
Review known issues and workarounds
Sun Storage 6180 Array Release Notes
Prepare the site
Sun Storage 6180 Array Site Preparation Guide
Install the cabinet
S
un Rack II User’s Guide
Install the rails for each tray
Sun Storage Modular Rail Kit Installation Guide
Install the power distribution units
Sun Cabinet Power Distribution Unit (PDU) Installation Guide
Install the array
Sun Storage 6180 Array Hardware Installation Guide
Install the management software
Sun Storage Common Array Manager Installation Guide
Documentation
http://www.oracle.com/technetwork/indexes/documentation/index.html
Support
https://support.oracle.com
Training
https://education.oracle.com
Copyright © 2009, 2011, Oracle and/or its affiliates. All rights reserved.
Copyright © 2009, 2011, Oracle et/ou ses affiliés. Tous droits réservés.
Part No.: E21495-01,
Mfg No.: 7012703
June 2011
