Oracle SPARC T8-1, Installation Manual, Page: 67 / 76

Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)
from DISK if present, otherwise from NET.
boot net - boot kernel from network
boot cdrom - boot kernel from CD-ROM
boot disk1:h - boot from disk1 partition h
boot tape - boot default file from tape
boot disk myunix -as - boot myunix from disk with flags "-as"
dload <filename> ( addr -- ) debug load of file over network at address
Examples:
4000 dload /export/root/foo/test
?go - if executable program, execute it
or if Forth program, compile it
10.
During the installation, supply the configuration parameters as directed.
See “Oracle Solaris OS Configuration Parameters” on page 67 .
Related Information
■
“Configure the Preinstalled OS” on page 63
■
“Reach a State to Install a Fresh OS (Oracle ILOM CLI)” on page 63
■
“Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)” on page 65
■
“Assign a Static IP Address to the NET MGT Port” on page 68
Oracle Solaris OS Configuration Parameters
When configuring the Oracle Solaris OS, you are prompted for the following configuration
parameters. For more information about these settings, refer to the Oracle Solaris
documentation.
Parameter Description
Language Select a number from the displayed language list.
Locale Select a number from the displayed locale list.
Terminal Type Select a terminal type that corresponds with your terminal device.
Network? Select Yes.
Multiple Network Interfaces
Select the network interfaces that you plan to configure. If you are not sure, select the first one in the
list.
DHCP? Select Yes or No according to your network environment.
Host Name Type the host name for the server.
IP Address Type the IP address for this Ethernet interface.
Subnet?
Select Yes or No according to your network environment.
Subnet Netmask If your answer to Subnet? was Yes, type the netmask for the subnet for your network environment.
Powering On the Server for the First Time 67