Oracle SPARC T7-4, Installation Manual

Page: 53 / 90

Identifying Ports
Identifying Ports
■
“USB Ports” on page 53
■
“SER MGT Ports” on page 54
■
“NET MGT Port” on page 55
■
“Ethernet Ports” on page 56
■
“VGA Port” on page 57
Related Information
■
“Server Overview” on page 12
■
“Front Panel Components” on page 14
■
“Rear Panel Components” on page 15
■
“Cabling Requirements” on page 51
■
“Connecting Data and Management Cables” on page 58
USB Ports
Two USB 3.0 ports are located at the rear panel. Two additional USB 3.0 ports are located on
the main module and are accessible from the front panel. See the location of the USB ports at
“Front Panel Components” on page 14 and “Rear Panel Components” on page 15 . The USB
ports support hot-plugging. You can connect and disconnect USB cables and peripheral devices
while the server is running without affecting server operations.
Each USB port supplies 5V output at 2 A.
Connecting Cables 53