manualshive.com logo in svg

Oracle SPARC T7-2, Service Manual, Page: 41 / 188

Share
Download
Oracle SPARC T7-2 Service Manual Download Page 41

View Log Files (Oracle Solaris)

■

“View Log Files (Oracle ILOM)” on page 41

■

“POST Overview” on page 42

View Log Files (Oracle Solaris)

The error logging daemon, 

syslogd

, automatically records various system warnings, errors, and

faults in message files. These messages can alert you to system problems such as a device that

is about to fail.

The 

/var/adm

 directory contains several message files. The most recent messages are in

the /

var/adm/messages

 file. After a period of time (usually every week), a new 

messages

file is automatically created. The original contents of the 

messages

 file are rotated to a file

named 

messages.1

. Over a period of time, the messages are further rotated to 

messages.2

 and

messages.3

, and then deleted.

1.

Log in as superuser.

2.

Type:

# 

more /var/adm/messages

3.

To view all logged messages, type:

# 

more /var/adm/messages*

Related Information

■

“Check the Message Buffer” on page 40

■

“View Log Files (Oracle Solaris)” on page 41

■

“POST Overview” on page 42

View Log Files (Oracle ILOM)

1.

View the event log.

Detecting and Managing Faults

41

Summary of Contents for SPARC T7-2





























































































































































































Reviews:

No comments