Oracle SPARC T7-2, Installation Manual

Page: 63 / 78

Oracle Solaris OS Configuration Parameters
dload <filename> ( addr -- ) debug load of file over network at address
Examples:
4000 dload /export/root/foo/test
?go - if executable program, execute it
or if Forth program, compile it
Related Information
■
“Configure the Preinstalled OS” on page 58
■
“Reach a State to Install a Fresh OS (Oracle ILOM CLI)” on page 59
■
“Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)” on page 61
■
“Assign a Static IP Address to the NET MGT Port” on page 66
Oracle Solaris OS Configuration Parameters
When configuring the Oracle Solaris OS, you will be prompted for the following configuration
parameters. For more information about these settings, refer to the Oracle Solaris
documentation.
Parameter Description
Language Select a number from the displayed language list.
Locale
Select a number from the displayed locale list.
Terminal Type Select a terminal type that corresponds with your terminal device.
Network?
Select Yes.
Multiple Network Interfaces Select the network interfaces that you plan to configure. If you are not sure, select the first one in the
list.
DHCP?
Select Yes or No according to your network environment.
Host Name Type the host name for the server.
IP Address
Type the IP address for this Ethernet interface.
Subnet? Select Yes or No according to your network environment.
Subnet Netmask If your answer to Subnet? was Yes, type the netmask for the subnet for your network environment.
IPv6?
Specify whether or not to use IPv6. If you are not sure, select No to configure the Ethernet interface
for IPv4.
Security Policy
Select either standard UNIX security (No) or Kerberos Security (Yes). If you are not sure, select No.
Confirm Review the onscreen information and change it if needed. Otherwise, continue.
Name Service Select the name service according to your network environment.
If you select a name service other than None, you will be prompted for additional name service
configuration information.
NFSv4 Domain Name
Select the type of domain name configuration according to your environment. If you are not sure,
select
Use the NFSv4 domain derived by the system
.
Powering On the Server for the First Time 63