Oracle SPARC T7-1, Service Manual

Page: 27 / 190

Identify Disabled Components
1.
At the Oracle ILOM prompt, type:
-> show disabled
Target | Property | Value
-----------------------------------+----------------+--------------------
...
/SYS/MB/CM0/CMP | disable_reason | Configuration Rules
...
2.
For additional information about a disabled component, type the
show -t
command and the Oracle ILOM target.
See “Component Names Displayed by Diagnostic Software ” on page 27 .
For example:
-> show -t /SYS/MB/CM/CMP/BOB21/CH1/DIMM
Target | Property | Value
-----------------------------------+------------------------+------------
...
/SYS/MB/CM/CMP/BOB21/CH1/DIMM | type | DIMM
/SYS/MB/CM/CMP/BOB21/CH1/DIMM | ipmi name | P0/M3/B0/C1/D0
/SYS/MB/CM/CMP/BOB21/CH1/DIMM | requested_config_state | Enabled
/SYS/MB/CM/CMP/BOB21/CH1/DIMM | current_config_state | Enabled
/SYS/MB/CM/CMP/BOB21/CH1/DIMM | disable_reason | Configuration Rules
/SYS/MB/CM/CMP/BOB21/CH1/DIMM | fru_name | 8192MB DDR4 SDRAM DIMM
...
Related Information
■
“Log In to Oracle ILOM (Service)” on page 24
■
“Identify Faulted Components” on page 24
■
“Component Names Displayed by Diagnostic Software ” on page 27
Component Names Displayed by Diagnostic
Software
Use the information in this table to identify the name of a component that requires service.
Component Oracle ILOM Target Links
Battery
/SYS/MB/BAT
“Servicing the Battery” on page 125
DIMMs on motherboard
/SYS/MB/CM/CMP/BOB
n
/CH
n
/DIMM0
“Servicing Memory Risers and
DIMMs” on page 89
Detecting and Managing Faults 27