Oracle SPARC T7-1, Installation Manual

Page: 61 / 88

Connect Ethernet Network Cables
Connect Ethernet Network Cables
The server has four Gigabit Ethernet network connectors, marked NET 0, NET 1, NET 2,
and NET 3. Use these ports to connect the server to the network. The Ethernet interfaces
operate at 100 Mbps, 1000 Mbps, and 10000 Mbps. See, “Connect Ethernet Network
Cables” on page 61 .
Note -
The Oracle ILOM sideband management feature enables you to access the SP using one
of these Ethernet ports. Refer to “Connecting to the SP (In-band)” in SPARC T7 Series Servers
Administration Guide .
Note - To achieve 1GbE network speeds, use Category 6 (or better) cables and network devices
that support 1000BASE-T networks.
1. Connect a Category 5 (or better) cable from your network switch or hub to
Ethernet Port 0 (NET 0) on the rear of the chassis.
Connecting Cables 61