Oracle SPARC T5-4, Installation Manual, Page: 27 / 92

ESD Precautions
Preparing for Installation 27
■
Server Getting Started
ESD Precautions
Electronic equipment is susceptible to damage by static electricity. Use a grounded antistatic
wriststrap, footstrap, or equivalent safety equipment to prevent electrostatic damage when you
install or service the server.
Caution -
To protect electronic components from electrostatic damage, which can permanently
disable the server or require repair by service technicians, place components on an antistatic
surface, such as an antistatic discharge mat, an antistatic bag, or a disposable antistatic mat.
Wear an antistatic grounding strap connected to a metal surface on the chassis when you work
on server components.
Related Information
■
“Handling Precautions” on page 26
■
“Tools Needed for Installation” on page 27
■
“Rack Cautions” on page 31
Tools Needed for Installation
■
Long No. 2 Phillips screwdriver
■
Cutters or heavy duty scissors
■
Marking pen or tape
■
ESD mat and grounding strap
■
Hydraulic or mechanical lift (optional for two-person installation)
In addition, you must provide a system console device, such as one of the following:
■
ASCII terminal
■
Workstation
■
Terminal server (optional to capture initial boot output)
■
Patch panel connected to a terminal server
Related Information
■
“Handling Precautions” on page 26