Oracle SPARC T5-4, Service Manual

Page: 188 / 204

Verify the Rear Chassis Subassembly
188 SPARC T5-4 Server Service Manual • July 2016
■
All PCIe carriers or filler panels – see “Install a PCIe Card Carrier” on page 168 . Verify that
you are installing the PCIe cards back in their original slots using the notes that you took
when removing the cards from the slots earlier.
■
Rear I/O module – see “Install the Rear I/O Module” on page 178 .
5. Go to the front of the server and install the following components:
■
Both processor modules – see “Install a Processor Module or Processor Filler
Module” on page 64 .
■
Main module – see “Install the Main Module” on page 102 .
■
Both power supplies – see “Install a Power Supply” on page 140 .
6. Connect the power cords.
See “Connect Power Cords” on page 191
7. Power on the server.
See “Returning the Server to Operation” on page 191 .
8.
Verify the rear chassis subassembly.
See “Verify the Rear Chassis Subassembly” on page 188 .
Related Information
■
“Remove the Rear Chassis Subassembly” on page 184
■
“Returning the Server to Operation” on page 191
Verify the Rear Chassis Subassembly
1. Ensure that you have completed the following:
■
Applied power to the server.
See
“Connect Power Cords” on page 191 .
■
Started the system.
See
“Power On the Server (Oracle ILOM)” on page 192 .
2.
Log in to Oracle ILOM.
See “Log In to Oracle ILOM (Service)” on page 26 .
3. Start the faultmagmt shell.
->
start SP/faultmgmt/shell
Are you sure you want to start the faultmgmt shell (y/n)?
y