Install the Server Module Into the Modular System
The cover edge hangs over the rear of the server module by about .5 in. (1 cm).
2.
Slide the cover forward until it latches into place (panel 2).
3.
Install the server module into the modular system chassis.
See
“Install the Server Module Into the Modular System” on page 100
Related Information
■
“Install the Server Module Into the Modular System” on page 100
■
Install the Server Module Into the Modular System
Caution -
Insert a filler panel into an empty modular system slot within 60 seconds of server
module removal to ensure proper chassis cooling.
Caution -
Hold the server module firmly with both hands so that you do not drop it. The server
module can weigh as much as 20 pounds (9.0 kg).
1.
(If needed) Replace the cover.
See
“Replace the Cover” on page 99
.
100
SPARC T5-1B Server Module Service Manual • February 2019
Summary of Contents for SPARC T5-1B
