Oracle Oracle Financial Consolidation Hub, User Manual, Page: 173 / 220

Setting Up Analytical Reporting 19-9
all parameters as default
2.
Solve - This calculates the balances for parent values in the dimension hierarchies.
Leave all parameters as default.
3.
Set Current Process Run - Each time you run a business process, it creates a new
view. This task will create a view named <business process> - Current Instance,
which will always point to the latest view for the business process. This way, when
you create a report, you can select the current instance view to make sure the report
always reflects the latest data pulled into Enterprise Planning and Budgeting.
There are additional tasks that may be useful to you. Please refer to the Enterprise
Planning and Budgeting Users Guide for a description of the other tasks.
Schedule
Set the following parameters:
1.
Frequency - You can have the business process automatically run on a scheduled
interval, or have the business process run just once. You can also set a business
process to be run by procedural call, which allows it to be automatically run after
you run consolidation.
See: Submitting Consolidations, page 15-4.
Note:
If you set a business process to be run by procedural call, you
will need to make it effective before it can be automatically run
after consolidation.
2.
Number of Process Run Stored - Each time you run the business process, it stores
the balances it pulled in a view. Select the number of views to archive.
Note:
It is recommended that you select three. This gives you the ability
to see past runs, but does not produce a space burden.
Run Business Process
After you have set up a business process, you can run it.
Each time you run a business process, it pulls all designated balances into Enterprise
Planning and Budgeting. This set of balances is called a view. Each time you run the
business process, it creates a new view. The views are named <business process>
<number>, where <number> starts at 000 and increments each time you run the business
process.
Note:
You can use the business process task, Set Current Process Run,