Oracle Netra SPARC Administration Manual Download

Page: 97 / 108

Updating the Firmware

These topics describe how to update the system firmware and view current versions of firmware

for Oracle's SPARC and Netra SPARC T5 series servers.

■

“Display the Firmware Versions” on page 97

■

“Update the Firmware” on page 98

Related Information

■

“Understanding System Administration Resources” on page 11

Display the Firmware Versions

The

/HOST

property displays information about the firmware versions on the host. The output

includes the overall system firmware version and the versions of firmware components, such as

Oracle ILOM, OpenBoot, and POST.

Display the current host property values.

show /HOST

Refer to the

Oracle ILOM Administrator's Guide for Configuration and Maintenance

for more

information about the

show /HOST

command.

Examine the output to find the version listed for the system firmware or firmware

component you wanted.

Related Information

■

“Update the Firmware” on page 98

Updating the Firmware

Summary of Contents for Netra SPARC













































































































Search results

Summary of Contents for Netra SPARC

Reviews:

Related manuals for Netra SPARC

Brands by name

Popular brands

Oracle Netra SPARC, Administration Manual

Search results

Summary of Contents for Netra SPARC

Reviews:

Related manuals for Netra SPARC

Brands by name

Popular brands