manualshive.com logo in svg

Oracle Netra SPARC, Administration Manual

Share
Download
Oracle Netra SPARC Administration Manual Download Page 24

Power On the Server (Oracle ILOM CLI)

Power On the Server (Oracle ILOM CLI)

Note - 

By default, the host automatically attempts to boot when the host is reset or

powered on. To learn about the parameters that control this action, see 

“Configuring Boot

Parameters” on page 43

.

1.

Log in to Oracle ILOM.

See 

“Log In to Oracle ILOM” on page 17

.

Note - 

If you have a modular system, ensure that you are logged in to the desired server

module.

2.

At the Oracle ILOM prompt, type:

-> 

start /System

Are you sure you want to start /System (y/n) ? 

y

Starting /System

Note - 

To skip being prompted for confirmation, use the 

start -script /System

 command.

3.

Switch to the host console to view host output.

-> 

start /HOST/console

Are you sure you want to start /HOST/console (y/n)? 

y

Related Information

■

“Power On the Server (Oracle ILOM CLI)” on page 24

■

“Reset the Server (Oracle Solaris)” on page 30

■

“Reset the Server (Oracle ILOM)” on page 30

Power Off the Server (Oracle ILOM CLI)

1.

Log in to Oracle Solaris as a user with root privileges.

2.

Shut down Oracle Solaris.

24

SPARC and Netra SPARC T5 Series Servers Administration Guide • August 2016

Summary of Contents for Netra SPARC













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands