Oracle Netra SPARC S7-2 Series, Administration Manual, Page: 27 / 90

Power On the Server (Oracle ILOM Web Interface)
{0} ok #.
->
4. From the Oracle ILOM prompt, type:
-> stop /System
Are you sure you want to stop /System (y/n)? y
Stopping /System
->
Note - To perform an immediate shutdown, use the
stop -force /System
command. Ensure
that all data is saved before typing this command.
Related Information
■
“Power On the Server (Oracle ILOM Web Interface)” on page 27
■
“Reset the Server (Oracle Solaris)” on page 31
■
“Reset the Server (Oracle ILOM)” on page 31
Power On the Server (Oracle ILOM Web Interface)
Note -
By default, the host automatically attempts to boot when the host is reset or
powered on. To learn about the parameters that control this action, see “Configuring Boot
Parameters” on page 43 .
1. Log in to the Oracle ILOM web interface.
See “Log In to Oracle ILOM” on page 19 .
2. On the Summary page, in the Actions panel, click the Power State Turn On
button.
3.
When prompted, click OK to confirm the action.
Related Information
■
“Power On the Server (Oracle ILOM CLI)” on page 26
■
“Reset the Server (Oracle Solaris)” on page 31
■
“Reset the Server (Oracle ILOM)” on page 31
Controlling the Server 27