Oracle MiniCluster S7-2, Service Manual

Page: 35 / 38

Returning MiniCluster to Operation
This chapter describes how to return MiniCluster to operation after you have performed service
procedures. It includes:
■
“Returning Compute Nodes to Operation” on page 35
■
“Powering On MiniCluster” on page 35
Returning Compute Nodes to Operation
This section describes returning compute nodes to operation after servicing.
Note - The links in the following list take you to instructions outside of the MiniCluster library
to the SPARC S7-2 documentation library. Use your browser's Back button to return to the
MiniCluster library.
■
“Replace the Top Cover” in SPARC S7-2 Server Service Manual
■
“Return the Server to the Normal Operating Position” in SPARC S7-2 Server Service
Manual
■
“Reconnect Data Cables and Power Cords” in SPARC S7-2 Server Service Manual
■
“Power On the Server” in SPARC S7-2 Server Service Manual
Powering On MiniCluster
This section describes how to restore power after servicing MiniCluster.
Before you begin, return the compute nodes to operational status. Go to “Returning Compute
Nodes to Operation” on page 35 .
When powering on the system, each compute node is powered on separately.
Returning MiniCluster to Operation 35