background image

2

The Workstation 6 Series

The Oracle MICROS Workstation 6 Series consists of three configurations: the 610,
620, and 650.

The Oracle MICROS Workstation 610 features an Intel Atom processor and runs
the Microsoft Windows Embedded 8.1 Industry Pro operating system or the
Microsoft Windows 10 IoT Enterprise operating system. The 610 configuration with
the Microsoft Windows Embedded 8.1 Industry Pro operating system is available
with a 32 GB or 64 GB SSD.

The Oracle MICROS Workstation 620 features an Intel Celeron processor and
runs the Microsoft Windows 10 IoT Enterprise operating system.

The Oracle MICROS Workstation 650 features an Intel Core i5 processor and runs
the Microsoft Windows 10 IoT Enterprise operating system.

Each workstation is a Point of Sale (POS) terminal featuring a 15.6 inch widescreen
high-definition display with a projected capacitive touch screen.

Technical Specifications

 contains more details for each configuration of the

Workstation 6 Series.

Identifying Your Workstation

Primary I/O Ports

Internal I/O Ports

Adjustable Stand

Identifying Your Workstation

To identify your configuration of the MICROS Workstation 6 Series, use the following
indicators:

The Operator LED

For the 610, the light is blue.

For the 620 and 650, the light is green.

The label on the back of the workstation display

For the 610, the Model reads MICROS Workstation 6 or MICROS Workstation
6 (610).

For the 620, the Model reads MICROS Workstation 6 (620).

For the 650, the Model reads MICROS Workstation 6 (650).

Primary I/O Ports

The Primary I/O Panel contains the following ports:

12V Power Output

2-1

Summary of Contents for MICROS 610

































































































Reviews: