Squeeze the release buttons on either side of the
Controller front panel at
the same time and slide the Controller chassis forward until the slide rails
lock into position. You might have to remove screws locking the front
panel to the rack before the Controller slides forward.
Caution:
Deploy any rack anti-tilt mechanism before releasing the release
buttons and extending the
Controller chassis.
Figure 88: Slide the Controller to service position
Legend
1 Rack
2 Controller chassis
3 Release buttons
Important:
Before you slide the Controller chassis out, ensure that the
cables do not interfere with the movement of the Controller chassis.
Although the cable management arm (CMA) is hinged so that you can
extend the Controller chassis, all cables and cords must be out of the way
when you service the Controller components.
Remove the Controller Power Supply Cords
Controller Replacement Procedures
124
