Oracle Fabric Interconnect F2-12, Installation Manual

Page: 25 / 118

Record the MAC IDs
■
“ESD Precautions” on page 27
■
“Installation Tools” on page 27
Record the MAC IDs
1. Identify the prerequisite and subsequent installation tasks that you must
perform in conjunction with this task.
See “Installation Task Overview” on page 11 .
2. Remove the Customer Information sheet from the outside of the shipping carton.
3. On the Customer Information sheet, find the switch serial number.
4. Record the serial number to a document intended for this purpose.
5. In the Network Interfaces table of the sheet, find the primary MAC ID.
This is the MAC ID of the SP within the switch.
6. Record the SP MAC ID to the document.
7.
In the Network Interfaces table of the sheet, find the secondary MAC ID.
This is the MAC ID of the SCP within the switch.
8.
Record the SCP MAC ID to the document.
9.
Secure the Customer Information sheet in a safe place.
10. Consider your next steps.
■
If you will assign IP addresses to the SP and SCP through DHCP, configure
your DHCP server now.
See “Assign IP Addresses to the SP and SCP Through DHCP” on page 26 .
■
If you will assign static IP addresses to the SP and SCP through the SER
MGT port, go to “Handling Precautions” on page 26 .
Related Information
■
“Shipping Kit” on page 24
■
“Assign IP Addresses to the SP and SCP Through DHCP” on page 26
■
“Handling Precautions” on page 26
Preparing for Installation 25