Oracle EXADATA X6-2, Service Manual

Page: 111 / 284

Remove a PCIe Card From PCIe Slot 3
Servicing CRUs That Require Server Power-Off 111
3.
Hold the riser in one hand and use your other hand to carefully insert the PCIe
card connector into the Riser.
4. Install the PCIe riser into the server.
For instructions, see “Install a PCIe Riser Into PCIe Slot 1 or 2” on page 101 .
Remove a PCIe Card From PCIe Slot 3
1. Remove the PCIe riser from the server.
For instructions, see “Remove the PCIe Riser From PCIe Slots 3 and 4” on page 103 .
2. Remove the PCIe card from the riser.
a. Hold the riser in one hand and use your other hand to carefully remove the
PCIe card connector from the riser.