Oracle EXADATA X6-2 Installation Manual Download | Manualshive

Page: 22 / 72

background image

Exadata Storage Expansion Rack X6-2 Configuration Restrictions

■

At least three storage servers must be installed in the rack.

■

Up to 18 Exadata Storage Servers are supported in the rack. In this configuration, there are

two database servers installed in the rack.

■

Rack units U01, U20, U21, and U22 are reserved for the Cisco and Sun Datacenter

InfiniBand Switch 36 switches.

■

Database servers are installed in the rack in the following order:

1. Up to 4 servers in U16 to U19, starting with U16.
2. Up to 4 servers in U23 to U26, starting with U23.
3. Up to 7 servers in U39 to U27, starting with U39. The servers in these rack units are

separated by 1 rack unit, with solid fillers between the servers.

4. Up to 7 servers in U14 to U02, starting with U14. The servers in these rack units are

separated by 1 rack unit, with solid fillers between the servers. No Exadata storage

servers are installed in the rack.

■

Exadata storage servers are installed in the rack in the following order:

1. Up to 3 storage servers in U02 to U07, starting with U02.
2. Up to 4 storage servers in U08 to U15, starting with U08.
3. Up to 7 storage servers in U27 to U40, starting with U27.
4. Up to 2 storage servers in U26 to U30, starting with U26 (if no Database servers

installed in these rack units).

5. Up to 2 storage servers in U19 to U16, starting with U19 (if no Database servers

installed in these rack units).

6. 1 storage server in U41 to U42.

Exadata Storage Expansion Rack X6-2 Configuration

Restrictions

The following restrictions apply to Oracle Exadata Storage Expansion Rack X6-2 flexible

configurations:

■

Up to 19 Exadata storage servers are supported in the expansion rack.

■

Oracle Exadata Storage Expansion Rack X6-2 cannot be converted to Oracle Exadata

Database Machine X6-2 rack.

■

Rack units U01, U20, U21, and U22 are reserved for the Cisco and Sun Datacenter

InfiniBand Switch 36 switches.

■

Exadata storage servers are installed in the rack in the following order:

1. Up to 3 storage servers in U02 to U07, starting with U02.

22

Oracle Exadata Storage Server X6-2 Extreme Flash Installation Guide • July 2018

«
...
20
21
22
23
24
...
»

Summary of Contents for EXADATA X6-2









































































Reviews:

No comments

Related manuals for EXADATA X6-2

NECCare Platinum Express5800/A1160

Brand: NEC Pages: 4

NECCare Gold Express5800/320Fd

Brand: NEC Pages: 11

NEC Express5800/R120d-2E

Brand: NEC Pages: 39

UNIVERGE NEAX 2000 IPS

Brand: NEC Pages: 244

UNIVERGE NEAX 2000 IPS

Brand: NEC Pages: 191

UNIVERGE NEAX 2000 IPS

Brand: NEC Pages: 96

Redbooks ServeRAID-MR10k

Brand: IBM Pages: 48

Brand: Wyse Pages: 6

SUPERSERVER 5014C-MT

Brand: Supero Pages: 112

FusionServer G8600 V7

Brand: xFusion Digital Technologies Pages: 112

Brand: FS Pages: 91

Brand: Syncronorm Pages: 17

Brand: Vxl Pages: 2

Brand: EVS Pages: 70

Brand: TAG Pages: 44

Brand: Planex Pages: 75

Brand: Planex Pages: 89

Brand: Planex Pages: 86

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands