Oracle EXADATA X5-2 Page 23 Service Manual Download

Page: 23 / 262

Troubleshoot Hardware Faults Using the Oracle ILOM Web Interface

Related Information

■

See

“Troubleshoot Hardware Faults Using the Oracle ILOM Web Interface” on page 23

Troubleshoot Hardware Faults Using the Oracle ILOM Web

Interface

Note -

The screens shown in this procedure might differ from those for your server.

This procedure uses the basic troubleshooting steps described in

“Basic Troubleshooting

Process” on page 22

Use this procedure to troubleshoot hardware faults with the Oracle ILOM web interface and, if

necessary, prepare the server for service.

Note -

This procedure provides one basic approach to troubleshooting hardware faults. It

uses a combination of the Oracle ILOM web interface and command-line interface (CLI).

However, the procedure can be performed using only the Oracle ILOM CLI interface. For

more information about the Oracle ILOM web interface and CLI, refer to the Oracle ILOM

documentation.

Before beginning this procedure, obtain the latest version of the system product notes.

On a system with network access to the server, open a browser window.

In the web browser address bar, type the IP address or host name of the service

processor (SP), and then press Enter.

The Oracle ILOM login page appears.

Log in to the Oracle ILOM web interface.

Enter a user name (with administrator privileges) and password at the log-in screen. The Oracle

ILOM Summary Information page appears.
The Status section of the Summary screen provides information about the server subsystems,

including:

■

Processors

■

Memory

■

Power

■

Cooling

Troubleshooting and Diagnostics

Summary of Contents for EXADATA X5-2







































































































































































































































































Search results

Summary of Contents for EXADATA X5-2

Reviews:

Related manuals for EXADATA X5-2

Brands by name

Popular brands

Oracle EXADATA X5-2, Service Manual

Search results

Summary of Contents for EXADATA X5-2

Reviews:

Related manuals for EXADATA X5-2

Brands by name

Popular brands