manualshive.com logo in svg

Oracle EXADATA X5-2, Service Manual

The Oracle EXADATA X5-2 Installation Manual is an essential resource for effortlessly setting up this powerful product. Download the comprehensive manual for free from our website, enabling you to maximize the potential of your Oracle EXADATA X5-2 by following clear instructions and technical guidance.

Share
Download
background image

Install SAS Storage Drive Cables

Related Information

■

“Remove the Sun Storage 12 Gb/s SAS PCIe RAID HBA Card” on page 124

■

“Install SAS Storage Drive Cables” on page 121

Install SAS Storage Drive Cables

1.

Install SAS storage drive cables.

a.   

Install the SAS cables between the front storage drive backplane and the

Oracle Storage 12 Gb/s SAS PCIe RAID HBA card in PCIe slot 6 [1].

Route the SAS cable bundle through the chassis mid-wall and along the left side of the

chassis.

b.   

(Optional) Install the cables between the front storage drive backplane and

the rear-mounted storage drive backplane [2].

Route the SAS cable bundle through the chassis mid-wall and along the right side of the

chassis.

2.

Reconnect the SAS cables.

a.   

To reconnect the SAS cables between the front storage drive backplane and

the Oracle Storage 12 Gb/s SAS PCIe RAID HBA card, plug each cable into

its SAS connector until you hear an audible click [1].

See also 

“Install the Oracle Storage 12 Gb/s SAS PCIe RAID HBA Card” on page 127

.

Use the following table to ensure proper SAS cable connections:

System Disk

Configuration

Disk Backplane

Ports

HBA Port

Cable Part

Number

J302 (Upper)

Twelve storage drives

J301 (Lower)

J5A1

7091185

b.   

(Optional) To reconnect the SAS cables between the front storage drive

backplane and the rear storage drive backplane, plug each cable into its

SAS connector until you hear an audible click [2].

Attach the SAS cable to connector (J300) on the front storage drive backplane and to SAS

connectors (RHDD0 and RHDD1) on the rear storage drive backplane.

Servicing Components That Require Server Power-Off

121

Summary of Contents for EXADATA X5-2







































































































































































































































































Reviews:

No comments

Related manuals for EXADATA X5-2

Kaleidescape M700 Replacement Instructions Manual preview
M700
Brand: Kaleidescape Pages: 24
X-Micro WLAN 11g User Manual preview
WLAN 11g
Brand: X-Micro Pages: 74
Xblue Networks X-25 Installation Manual preview
X-25
Brand: Xblue Networks Pages: 148
E-Lins H900 Series Quick Start Manual preview
H900 Series
Brand: E-Lins Pages: 9
ZyXEL Communications NBG318S v2 Specifications preview
NBG318S v2
Brand: ZyXEL Communications Pages: 2
Edgewater Networks 200EW/E Quick Start Manual preview
200EW/E
Brand: Edgewater Networks Pages: 7
QNAP TVS-882BR User Manual preview
TVS-882BR
Brand: QNAP Pages: 74
StorCentric NESAN E48X Installation Manual preview
NESAN E48X
Brand: StorCentric Pages: 53
Tandberg Data STORAGE CAB4000 - Quick Install Manual preview
STORAGE CAB4000 -
Brand: Tandberg Data Pages: 13
Weidmuller IE-SW-VL09T-6TX-3SC Hardware Installation Manual preview
IE-SW-VL09T-6TX-3SC
Brand: Weidmuller Pages: 14
Allied Telesis Routers and Switches Datasheet preview
Routers and Switches
Brand: Allied Telesis Pages: 15
Synology DiskStation Series Upgrade Installation Instructions preview
DiskStation Series
Brand: Synology Pages: 6
ZyXEL Communications Prestige 642R Series User Manual preview
Prestige 642R Series
Brand: ZyXEL Communications Pages: 163
IBM eserver iSeries 270 Installation Manual preview
eserver iSeries 270
Brand: IBM Pages: 40
Wieland wienet UMS 5-L Installation Instruction preview
wienet UMS 5-L
Brand: Wieland Pages: 2
Ubiquiti Amplifi AFi-LR Quick Start Manual preview
Amplifi AFi-LR
Brand: Ubiquiti Pages: 32
Supero SuperServer 6123L-8R User Manual preview
SuperServer 6123L-8R
Brand: Supero Pages: 105
Iomega eGo 35329 Quick Start Manual preview
eGo 35329
Brand: Iomega Pages: 48

Brands by name

Popular brands

Load more brands