Oracle Dual Port 25 Gb, User Manual

Page: 60 / 88

Display Information About a Link Aggregation (Oracle Solaris x86)
Configure the link aggregation containing the
bnxt
interfaces in the default mode.
For example:
# dladm create-aggr -l net5 -l net6 aggr1
# dladm show-aggr
# ipadm create-ip aggr1
# ipadm create-addr -a 192.1.1.14/24 aggr1
For more information on link aggregation, refer to “Creating a Link Aggregation” in Managing
Network Datalinks in Oracle Solaris 11.3 .
Related Information
■
“Display Information About a Link Aggregation (Oracle Solaris x86)” on page 60
■
“Delete a Link Aggregation (Oracle Solaris x86)” on page 61
Display Information About a Link Aggregation (Oracle
Solaris x86)
The
ipadm
and
dladm
commands provide different details about link aggregations, as shown in
these examples.
For more information, refer to “Creating a Link Aggregation” in Managing Network Datalinks
in Oracle Solaris 11.3 .
For more information on the commands, refer to the Oracle Solaris
ifconfig
(1M) man page
and the
dladm
(5) man page.
Use the appropriate command to obtain the desired results.
■
Use the
ifconfig
command to examine the details about a link aggregation.
# ifconfig aggr1
aggr1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 32
inet 192.2.2.84 netmask ffffff00 broadcast 192.2.2.255
ether 0:15:17:75:ff:81
# ifconfig aggr2 aggr2: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500
index 33
inet 193.2.2.84 netmask ffffff00 broadcast 193.2.2.255
ether 0:15:17:75:ff:83
■ Use the
dladm show-aggr
command to show link aggregation status.
60 Oracle Dual Port 25 Gb Ethernet Adapter User's Guide • September 2017