manualshive.com logo in svg

Oracle Dual Port 25 Gb, User Manual

Share
Download
Oracle Dual Port 25 Gb User Manual Download Page 44

Installing RoCE

13.

Ensure that the OS installation begins on the Oracle Dual Port 25 Gb Ethernet

adapter.

14.

Ensure that the OS installer completes and begins the post-installation steps.

15.

After the OS installation completes, use the BIOS to change the boot device

priority to boot from hard disk to boot up the newly installed OS.

Unless you change the boot device priority, the OS installation process repeats.

Related Information

■

“Boot Over the Network (PXE)” on page 41

■

“Installing RoCE” on page 44

Installing RoCE

The 

RDMA

 software allows computers in a network to exchange data in main memory without

involving the processor, cache, or OS of either computer. RDMA can improve throughput and

performance because it frees up resources, and it can also facilitate a faster data transfer rate.

RDMA over Converged Ethernet (RoCE) is the network protocol that allows RDMA over an

Ethernet network.

44

Oracle Dual Port 25 Gb Ethernet Adapter User's Guide • September 2017

Summary of Contents for Dual Port 25 Gb

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands