10
Installing a Sun ZFS Storage 7x20 Controller
This section contains installation procedures for the Sun ZFS Storage 7420, 7320, and 7120
controllers.
Before beginning installation, see
Installation Prerequisites and Hardware Overviews
.
Use the following procedures to install a Sun ZFS Storage 7x20 controller:
•
Removing the Sun ZFS Storage 7x20 Mounting Brackets from Inside the Slide Rails
•
Installing the Mounting Brackets on a Sun ZFS Storage 7x20 Controller
•
Installing a Sun ZFS Storage 7x20 Controller onto the Rack Slide Rails
•
Installing a Sun ZFS Storage 7x20 Cable Management Arm
Removing the Sun ZFS Storage 7x20 Mounting Brackets from
Inside the Slide Rails
Use this procedure to remove the Sun ZFS Storage 7x20 mounting brackets from inside the
slide rails. If the mounting brackets were not shipped inside the slide rails, move on to
Installing the Mounting Brackets on a Sun ZFS Storage 7x20 Controller
1.
Unpack the slide rails and locate the slide rail lock at the front of the assembly.
2.
Squeeze and hold the tabs at top and bottom of the lock (1) while you pull the mounting
bracket out to the stop.
3.
Push the mounting bracket release button toward the front of the mounting bracket (2)
while withdrawing the bracket from the assembly.
Example 10-1 Disassembling a Sun ZFS Storage 7120/7320 Rail Kit
The following graphic illustrates the procedure for disassembling the Sun ZFS Storage
7120/7320 rail kit.
10-1
