Oracle Database Appliance X3-2, Service Manual

Page: 28 / 188

Preparing Oracle Database Appliance (Original Version) for Service
28 Oracle Database Appliance Service Manual • February 2016
ODA X3-2 ODA X4-2 ODA X5-2
Safety Symbols Safety Symbols Safety Symbols
Electrostatic Discharge Safety Electrostatic Discharge Safety Electrostatic Discharge Safety
Required Tools Required Tools Required Tools
Powering Down the Server Powering Down the Server Powering Down the Server
Disconnect Cables From the Server Disconnect Cables From the Server Disconnect Cables From the Server
Extend the Server to the
Maintenance Position
Extend the Server to the
Maintenance Position
Extend the Server to the
Maintenance Position
Remove the Server From the Rack Remove the Server From the Rack Remove the Server From the Rack
Take Antistatic Measures Take Antistatic Measures Take Antistatic Measures
Remove the Server Top Cover Remove the Server Top Cover Remove the Server Top Cover
Preparing Oracle Database Appliance (Original Version) for
Service
This chapter describes how to prepare Oracle Database Appliance (original version) for
servicing. If you have Oracle Database Appliance X3-2, Oracle Database Appliance X4-2, or
Oracle Database Appliance X5-2, go to “Preparing Oracle Database Appliance X3-2/X4-2/X5-2
for Service” on page 27 .
■
“Component Replacement Policy – CRUs and FRUs” on page 28
■
“Safety Information” on page 30
■
“Required Tools ” on page 30
■
“Obtaining the Chassis Serial Number” on page 30
■
“Shutting Down a Server Node and Powering Off the System” on page 31
■
“Performing Electrostatic Discharge and Antistatic Prevention Measures” on page 34
■
“Removing Server Nodes From the System Chassis” on page 34
■
“Removing the Server Node Top Cover” on page 35
■
“Removing the Middle Section of the System Top Cover” on page 36
Component Replacement Policy – CRUs and FRUs
The replaceable components in your Oracle Database Appliance (original version) are
designated as either field-replaceable units (FRUs) or customer-replaceable units (CRUs). Some
can be replaced with the power on, some require the powering off of a server node, and some
require the powering off of the entire system chassis.
■
A part designated as a FRU must be replaced by Oracle-qualified service technician.