Oracle Acme Packet 4500, Hardware Installation And Maintenance Manual

Page: 15 / 114

Acme Packet 4500 Hardware Installation and Maintenance Guide 9
2 Component Overview
Chassis
The Acme Packet 4500 is contained in a 1U rack-mounted chassis. It can be front- or
center mounted in standard 19” wide racks (up to 28” deep), with options for 23”
wide racks.
The front view of the Acme Packet 4500 chassis looks like this:
Figure 2 - 1. Acme Packet 4500 Front Panel
The rear view of the Acme Packet 4500 chassis looks like this:
Figure 2 - 2. Acme Packet 4500 Rear Panel
Mounting
Hardware without
Locking
Mechanism
The Acme Packet 4500 is supported by a pair of cabinet slides that are affixed to an
equipment rack by front and rear mounting flanges. The cabinet slides are adjustable
for equipment racks of various depths. Slide extenders are also included with the
Acme Packet 4500 for installations requiring up to an extra 4” (10.16 cm) of depth.
Note: There are 2 different types of mounting hardware. If your 3820
shipped before September 2013 you will have the mounting hardware
without the Locking Mechanism.
Equipment Rack
Installation Hardware
For equipment rack installations, the system chassis is outfitted with left and right
chassis-mounted slides that fit into stationary slides. The stationary slides are
secured to the equipment rack. This two-piece mounting system simplifies chassis
installation and removal. Once inserted into the equipment rack, the Acme Packet
4500 is secured in place with two quick disconnect thumb screws.