Oracle Acme Packet 4500, Hardware Installation And Maintenance Manual

Page: 11 / 114

Acme Packet 4500 Hardware Installation and Maintenance Guide 5
1 Safety
Introduction
This chapter provides an overview of the recommended safety precautions for
installing the Acme Packet 4500.
Before you install your Acme Packet 4500, we recommend that you review the
contents of this chapter and the
System Installation chapter. Both chapters provide
information intended to protect you and your Acme Packet 4500 from experiencing
any harm during the installation process. These chapters also provide information
that helps to keep your Acme Packet 4500 functioning properly and keep it from
damage.
Safety and Regulatory Certifications
For information regarding safety and regulatory certifications applicable to the Acme
Packet 4500, refer to the
Acme Packet Platforms Safety and Compliance Guide in
addition to this chapter.
General Safety Precautions
To ensure general safety, follow the safety precautions listed in this section.
Fan Module
To avoid overheating the system, do not block the air inlets or the fan module, or
otherwise obstruct airflow to the system. Keep the area around the Acme Packet
4500 clean and clutter-free.
System
Maintenance
Aside from the fan module, power supply, and NIUs, there are no user-serviceable
parts inside the Acme Packet 4500 chassis. Only professionals trained to maintain,
adjust, or repair the Acme Packet 4500 may provide these services.
Fiber Optic Cable
Looking into a fiber optic cable can cause eye damage. Never look directly into the
end of the fiber optic cables. Instead, use a fiber optic power meter to determine if
power is present.
Environmental
Specifications
Adhere to the Environmental Specifications section in the Specifications chapter of this
guide.
Using This Guide
Read and understand all notes of warning and caution included in the Acme Packet
4500 documentation. These warnings and cautions are designed to keep you safe
and protect the Acme Packet 4500 from damage.