manualshive.com logo in svg

Oracle 7101674, Installation Manual, Page: 6 / 76

Share
Download
Oracle 7101674 Installation Manual Download Page 6

Contents

▼  To Remove the Universal Host Bus Adapter .......................................... 37

3  Operating Protocol Mode Configuration

 .......................................................  39

About the Operating Protocol Mode .................................................................  39
Determining and Changing the Current Operating Protocol Mode ........................... 40

Using the Fast!UTIL Utility to Determine and Change the Operating Protocol

Mode ................................................................................................... 41
▼  To Determine and Change the Operating Protocol Mode Using the UEFI

Setup Menus ......................................................................................... 46
▼  To Determine and Change the Operating Protocol Mode Using the 

FCode

Utility .................................................................................................. 49
Determining and Changing the Operating Protocol Mode Using the

QConvergeConsole CLI .......................................................................... 50
▼  To Determine and Change the Operating Protocol Mode Using the

QConvergeConsole GUI .........................................................................  54

SR-IOV/FC-IOR Support ................................................................................ 57

4  Software Installation

 .....................................................................................  59

Driver Software for the Oracle Solaris OS .........................................................  59

Oracle Solaris Diagnostic Support ............................................................  60

Installing Software for the Red Hat and SUSE Linux OSes ...................................  60

▼  To Install Universal HBA Software for the Red Hat and SUSE Linux

OSes ...................................................................................................  61

Installing Software for the VMware Technology .................................................  61

▼  To Install the Universal HBA Software for the VMware Technology ..........  61

Installing Software for the Windows OS ............................................................ 62

▼  To Install the Universal HBA Software for the Windows OS ....................  62

Diagnostic Support for the Oracle Solaris, Red Hat, SUSE Linux, and Windows

OSes ...........................................................................................................  63

▼  To Install Diagnostic Support for Oracle Solaris, Red Hat, and SUSE Linux

OSes ...................................................................................................  63

Installing the CLI for Updating the BIOS and FCode ...........................................  64
Updating the Universal HBA Firmware ............................................................. 64

▼  To Update the Universal HBA Firmware ..............................................  64

5  Known Issues

 ................................................................................................ 69

Link Aggregation Control Protocol (LACP) Cannot Be Used In Certain

Conditions .................................................................................................... 69

6

Sun Storage 16 Gb Fibre Channel PCIe Universal Host Bus Adapter, QLogic Installation Guide For HBA Model

7101674 • August 2018

Summary of Contents for 7101674













































































Reviews:

No comments