Oracle Audio Technologies
DAC 1000 D/A con pre amplifier
12
output. Be sure to turn the power off when you change BYPASS /
UPSAMPLE mode switch.
Vol Up / Vol Down
To control the volume, use the up and down buttons. Volume
varies from 00.0 up to 59.5, and MAX (120 Step)
. When in
“Standby” mode, all the volume level are memorized. And they
are recovered when the unit is on again. The main power-off from
the rear panel will erase the level information from
DAC 1000
REMOTE CONTROL OPERATION
The remote control handset
The remote control handset of your Oracle Dac 1000 can control the Oracle CD 1000 or other cd
player model, by using the code RC-5.
Battery installation procedure
Remove the back cover on the remote control handset. Install two "AAA" batteries following the
proper polarity. Test the remote control handset for proper operation. Install back cover.
Note:
It is strongly recommended to use Alkaline batteries for an extended cycle
operation of the remote control handset but more importantly to prevent any
chemical leakage.
