19
STEP3/End - Rinsing process complete.
Clean the tank and wipe the oven.
Also clean the filter foam (see chapter
CLEANING THE FILTER FOAM)
END
By pressing the start/stop icon, user can go out of settings menu back to standby mode.
You can go out of settings menu also if you hold selection knob on the left for 3 sec, or it
you turn the system knob.
To change the settings, rotate the setting knob to the right and hold it for three seconds.
Press the start/sop icon to scroll through respective settings or parameters. To change a
parameter, rotate the setting knob to the right or to the left.
602220
After a power outage or after the appliance is switched off, the
additional function settings will remain stored for no more than a
few minutes. Then, all settings, except for the acoustic signal and
child lock will be reset to factory defaults.
