OPW M00-051.00 FSC3000, Command-Line Configuration Manual

Page: 48 / 181

Set Up Hose 5 (Y/N)? N
Set Up Hose 6 (Y/N)? N
Set Up Hose 7 (Y/N)? N
Set Up Hose 8 (Y/N)? N
Repeat process to configure each position for each fueling point.
6.5.4 Install PCT # POS # (# = PCT 1 to 4 and POS 1 to 8)
The
Install PCT # POS #
command tells the system that a PCT position will be used.
Install PCT # POS # (Repeat process to install each configured position)
6.5.5 Install PCT # (# = 1 to 4)
The
Install PCT #
command tells the system that the PCT is there and to communicate with it.
Install PCT # (Repeat process to install each configured PCT)
Doc. No.: M00-051.00 Rev.: 10
Page 48 of 181