OPW M00-051.00 FSC3000, Command-Line Configuration Manual

Page: 108 / 181

15.3.3 ComdataPOS
The ComdataPOS host is used when the site is open to the public (or by private sites when a TCP/IP
connection is required). When using this host, card prompting is host driven.
When selected there are two options specific to its setup:
NETWORK option settings NETWORK : ComdataPOS
1 - Location Code..................
Dialup Device Type............. TRT2
Device Type Sub-Id............. 1
2 - Site Name......................
3 - Site City......................
4 - Site State.....................
5 - Redial Attempts................ 1
6 - Connect Time......(Seconds).... 30
7 - Local Authorization............ Disabled
8 - Network System................. ON
ON............................. 12:00 AM
OFF............................ 12:00 AM
9 - Authorization Message.......... ^0^FHAVE A SAFE TRIP
10 - Re-Prompt Time....(Minutes).... 10 (set to zero for DTC systems)
11 - Communication Parameters....... 2400 7E1 T60Y
12 - Process USA Market MC? ........ NO
Process Canadian Market MC? ... NO
Enter option number or press [RETURN] to exit:
1. Location Code…
Like all networks the “Location Code” (Site ID) is provided by Comdata when the site is boarded. The “Dialup
Device Type” and “Device Type Sub-Id” are optional settings that are transmitted to host. They are available
for edit but should not be changed unless specifically directed by Comdata.
2-4. Setup Options 2-4
Options 2- 4 should be set up with information from the network. The Technician should contact the Merchant
for information.
5. Redial Attempts
The Redial Attempts option defines how many times the system will try to connect to the network. Default is 1.
6. Connect Time
The Connect Time option defines the maximum time to stay connected to the network when trying to approve
a card. If this time is reached, the transaction will be terminated.
7. Local Authorization
The Local Authorization option allows configuration of processing rules if the FSC can authorize network
cards offline down the host is down. Not all networks support this feature. If you enable Local Authorization
for a specific host you should first confirm with the host that this feature is allowed for the specific site.
NOTE:
Depending on the host being configured different options may be presented.
Enter option number or press [RETURN] to exit: 7
Doc. No.: M00-051.00 Rev.: 10
Page 108 of 181