User’s guide VS 2000 CA User’s guide VS 2000 CA
2
Machine construction:
Installation:
•
Pull out the volume for shreds. Push four castors into the wholes at the
bottom of the bin and secure it by the gum covers.
•
Wsu
ń
z powrotem pojemnik na
ś
cinki
•
Place the cutting head on the waste basket
•
Plug in the 230V wall socket
•
Press the main switch to the position „AUTO/ON”, green LED
illuminates
The shredder is ready to operation
3
LCD Display Functions
If these warning icons
flash, please follow
step 2
If this icon flashes, please follow step 1
1.
The machine works properly when this icon
flashes, the dots show the increasing power
2
OVERHEAT – cool down the motor for 30
minutes
OVERLOAD – max 20 sheets can be shredded
DOOR OPEN – please make sure the basket is
in the right place
Operation:
The main switch is located at the top of the shredder. It can be set in three
positions:
•
ON/OFF – after choosing this option the machine is ready to operation.
Starts automatically when the paper is inserted and stops automatically
when no further paper is inserted.
•
FWD – this option is recommended for cleaning scraps of paper on the
cutters. This button works only during ON-mode
•
REV –this position helps to remove paper if it gets stuck inside the
cutting shafts. It can also be used for cleaning shredding mechanism.
When the waste bin is full the machine does not work
→
removing shreds
from the bin is necessary.
