●
When there is a lamination jam, press down the REV button (5). The jammed lamination will be
reserved out automatically
Maintenance and service:
●
Before clearing the equipment remove the plug from a mains socket
●
Be careful when cleaning the equipment! The water or any other liquids must not get inside the
equipment.
●
If the pouch gets entangled in the rollers or the laminator does not operate correctly contact the
Dealer or service team
10
User’s guide OPUS uniLAM A3
Malfunction
Laminating pouch stuck
inside the laminator
Both LEDS are off at the
same time
Cause
Too high laminating temperatur
The laminating pouch was
inserted into the opening with the
wrong end
Maximum laminating thickness
exceeded
Main switch is in OFF position
The Power voltage was cut off
because of the equipment over
heating
Remedy
Pull the laminated document
out of the feed opening. If it is
not possible, contact the dealer
or service team. Do not take the
cover out of the laminator!
Check if the equipment is
switched on, if the fuse is working
correctly. If this does not solve
the problem, contact the dealer
or service team.
